Description

This product uses polyolefin as the main raw material after three-tier CO-extrusion blown film. And can be combined with general thin films（PET、OPP、PA、VMPET ,etc.）for different needs.

Characteristic

  Suits for sealing packaging the cup of leisure foods(such as yogurt, lactic acid drinks, etc.).

  Easy to open or use.

  With lower sealing temperature.

  Uniform in tearing strength, and no residue in the seal.

  According to the request from customers, it can choose different substrate (such as OPP, AL, PET, PA, etc.) to compound.

Technical indicators

⑴ The above data are for reference only, not the specification of the product.

⑵ Product mix:AL30//PE45//Yisile-S20

Usage method

●It is suggested that the temperature set at 160-200 degrees centigrade,0.35-0.65Mpa.

●Avoid putting much oil material at the sealing position which can affect the heat sealing performance.

●The pressure and drop test should be carried out after the sealing is fully cooled.

●Ensure the sharpness of the die cutting tool to avoid the appearance of drawing and burr on the edge of the die cutting and affecting the appearance.

●Because of the differences in the processing equipment and processing technology between different manufacturers, it is suggested that the machine test should be carried out first.

Purpose

Suits for sealing packaging the cup of leisure foods(such as yogurt, lactic acid drinks, etc.).

Matters need attention

●Prevent mechanical collisions and be careful when loading the car. In order to avoid the product aging ,the car should stop in the shade when parking or unloading.

●It should be placed in a clean, dry, ventilated and cool storeroom under no more than 35 degrees centigrade,  and properly stacked with a distance from the heat source more than 2m, which can aviod direct light.

●When used, it should be used now and should not be placed in a high temperature workshop for a long time.