Home / Products / EASILER / Yisile-P Easy-tear Film Used For Snack Food Packaging
Yisile-P Easy-tear Film Used For Snack Food Packaging

Yisile-P Easy-tear Film Used For Snack Food Packaging

The following information is based on the knowledge and experience we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that we consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore,we do not bear any responsibility.

View: 500



This product uses polyolefin as the main raw material after three-tier CO-extrusion blown film. This easy-open heat sealing film is based on PP substrate. And can be combined with general thin films (PET, OPP, PA, etc.) for different needs.


The product is suitable for jelly, biscuit and other leisure food which use PP to seal its cup or bottle.

Easy to open or use.

With lower sealing temperature.

Uniform in tearing strength, and no residue in the seal.

Can adjust the difficulty of exposing the cover according to the request from customers.

Can choose different substrate(such as OPP,AL,PET,PA,etc.) according to the request from customers.

Can use pasteurization.

Technical indicators


Pull off force,N





elongation at break,%





Peel strength,N/15mm



Peeling force(Heat sealing of PP sheet,professional flat seal instrument 200℃,1.1s,0.38MPa, Heat seal width 3mm)


Tearing force(Heat sealing of PP sheet,professional flat seal instrument 200℃,1.1s,0.38MPa,Heat seal width 3mm)


⑴ The above data are for reference only, not the specification of the product.

⑵ Product mix:PET12//PET12//Yisile-P58

Usage method

●In general, two hot sealing knives are required for the heat sealing process of the cover film. It is suggested that the temperature set at 180-220 degrees centigrade,0.35-0.65Mpa.

●Avoid putting much oil material at the sealing position which can affect the heat sealing performance.

●The pressure and drop test should be carried out after the sealing is fully cooled.

●Ensure the sharpness of the die cutting tool to avoid the appearance of drawing and burr on the edge of the die cutting and affecting the appearance.

●Because of the differences in the processing equipment and processing technology between different manufacturers, it is suggested that the machine test should be carried out first.


Suits for seal package for jelly, salad, biscuits and other leisure foods.

Matters need attention

●Prevent mechanical collisions and be careful when loading the car. In order to avoid the product aging ,the car should stop in the shade when parking or unloading.

●It should be placed in a clean, dry, ventilated and cool storeroom under no more than 35 degrees centigrade,  and properly stacked with a distance from the heat source more than 2m, which can aviod direct light.

●When used, it should be used now and should not be placed in a high temperature workshop for a long time.



Related Products: