High Temperature Cooking Film Series
Disclaimer:The following information is based on t...
Disclaimer:The following information is based on the knowledge and experience we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that we consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore,we do not bear any responsibility.
SLEEVEMAKER-GH is a heat-shrinkable polyester film with excellent shrinking characteristics. It’s applicable in sleeves, suitable for hot air and steam tunnels, and can meet demands on different packaging products, shapes, shrinking requirement.
Properties |
Unit |
Spec. |
Test Method |
Typical thickness |
μm |
45±2 |
ASTM D 1400 |
Density |
g/c㎡ |
1.32 |
ASTM D 1505 |
Tensile strength -Transverse Direction(TD) -Machine Direction(MD) |
Psi |
≥27550 ≥7975 |
ASTM D-882 |
Elongation at break -Transverse Direction(TD) -Machine Direction(MD) |
% |
≥50 ≥450 |
ASTM D-882 |
Shrinkage -Transverse Direction(TD) -Machine Direction(MD) |
% |
≥70 ≤5 |
Chancing Method (85℃,10 Sec.in water) |
Haze |
% |
≤5 |
ASTM D-1003 |
Gloss@ 60° degrees |
% |
≥87 |
ASTM D-523 |
Coefficient of friction |
|
0.4-0.6 |
ASTM D 1894 |
Wetting Tension |
mN/m |
≥40 |
ASTM D2578 |
SLEEVEMAKER-GH, Shrink Curve
All details in this data sheet are based on our present technical knowledge.
They neither guarantee certain characteristics of products nor their suitability for a particular application.
Disclaimer:The following information is based on t...
Disclaimer:The following information is based on t...
The following information is based on the knowledg...
Disclaimer:The following information is based on t...
The following information is based on the knowledg...
Disclaimer:The following information is based on t...
Disclaimer:The following information is based on t...
Disclaimer:The following information is based on t...